Maintenance Schedule; Cleaning Supplies - Kodak Ngenuity 9000 Series User Manual

Maintenance
schedule
Maintenance
Clean feed rollers: pick, drive,
and separator rollers
Clean transport rollers
Clean Optics: imaging guides,
cameras glass covers, sen-
sors. Optics does not include
lamps. The lamps (LEDs)
should not be cleaned or
wiped with any type of wipe or
solvents.
Camera calibration
Replace feed rollers
Ink cartridge(s) - only relevant
if optional imprinter(s)
installed

Cleaning supplies

5-2
The following table is a recommended schedule for performing basic
maintenance functions. Some procedures may need to be performed
more frequently depending on your operating environment and the
types of documents being scanned.
Recommended
10,000 pages
50,000 pages 5K - 100K
50,000 pages 5K - 150K
Every 1200 hours
600,000 pages
Approximately
34,000 pages (can
vary depending on
number of charac-
ters per page and
font used, etc.)
Scanner consumables and cleaning supplies are available from
resellers, web merchants and from the Kodak on-line store
(http:/scannerstore.kodak.com).
• Ngenuity Roller Kit
• Ngenuity Cleaning Kit including:
- Blower brush
- Transport cleaning sheets
- Roller and glass cleaner
- Lint-free cleaning cloths
- Cleaning wipes
- Swabs
Range
1K - 50K • Skewed documents
• Multifeeds
• Feeder jams
• Multifeeds
• Transport jams
• Elongated images
Glass Camera Covers / Imaging Guides
• Streaks in the image
• Reduced OCR/ICR/Barcode recognition
rates
• Blurred images
Page Sensors
• Entry/exit sensor errors
Feeder Sensors
• Feeder table does not lower when out of
paper
N/A Poor color image quality (e.g. white tinted
green, red or blue)
100K - • Noticeably worn rollers
900K • Page skewing, multifeeds and paper
jams continue to occur after cleaning is
performed
N/A Poor print quality
Symptoms
A-61662 April 2010