Control Panel - Supero SUPERSERVER 6027R-TRF User Manual

SUPERSERVER 6027R-TRF USER'S MANUAL
3.5" Drive Bays (2)
IPMI LAN
6-2

Control Panel

The control panel (located on the front of the chassis) must be connected to the
JF1 connector on the serverboard to provide you with system status indications. A
ribbon cable has bundled these wires together to simplify the connection. Connect
the cable from JF1 on the serverboard to the Control Panel PCB (printed circuit
board). Make sure the red wire plugs into pin 1 on both connectors. Pull all excess
cabling out of the airfl ow path. The LEDs inform you of system status.
See Chapter 3 for details on the LEDs and the control panel buttons. Details on
JF1 can be found in Chapter 5.
Figure 6-1. Front and Rear Chassis Views
Slim DVD-ROM Drive
SATA Drives (8)
Keyboard/Mouse Port
USB Ports
COM1 Port
USB Ports (2) COM Port
System Reset
4 Standard Size PCI Slots
VGA Port
Ethernet Ports
6-2
Control Panel
Main Power