Supero SUPERSERVER 6027R-TRF User Manual page 84

SUPERSERVER 6027R-TRF USER'S MANUAL
Serial-ATA (SATA) Controller 0~1
Use this feature to activate or dactivate the SATA controller, and set the com-
patibility mode. The options for Controller 0 are Enhanced and Compatible.
The default setting for SATA Controller 1 is Enhanced.
AHCI Mode
The following items are displayed when the AHCI Mode is selected:
Aggressive Link Power Management
Select Enabled to enable Aggressive Link Power Management to support
Cougar Point B0 stepping and beyond. The options are Enabled and Dis-
abled.
Port 0~Port 5 Hot Plug
Select Enabled to enable hot-plug support for a port specifi ed by the user so
that the user is allowed to change a hardware component or a device without
shutting down the system. The options are Enabled and Disabled.
Staggered Spin-up
Select Enabled to enable Staggered Spin-up support to prevent excessive
power consumption caused by multiple HDDs spinning-up simultaneously.
The options are Enabled and Disabled.
RAID Mode
The following items are displayed when RAID Mode is selected:
PCH RAID CodeBase
Set this item to Intel or LSI to specify the codebase to be used for RAID sup-
port. The options are Intel and LSI.
Port 0~5 Hot Plug
Select Enabled to enable hot-plug support for a port specifi ed by the user.
The options are Enabled and Disabled.
7-14