Serial Port Console Redirection - Supero SUPERSERVER 6027R-TRF User Manual


Super IO Confi guration (WPCM450)
Super IO Chip
Displays the Super IO chip type.

Serial Port 0 Confi guration/Serial Port 1 Confi guration
The submenus allow the user to confi gure the following settings for Serial Port
0 or Serial Port 1:
Serial Port
Select Enabled to enable a serial port specifi ed by the user. The options are
Enabled and Disabled.
Serial Port Mode
This feature allows the user to set the serial port mode for Console Redirection.
The options are SOL and COM.
Device Settings
This feature indicates whether or not a reset is required for a serial port specifi ed.
Change Settings
This option specifi es the base I/O port address and the Interrupt Request address
of Serial Port 1 and Serial Port 2. The options for Serial Port 1 and Port 2 are:
Auto,
IO=3F8h; IRQ=4;
IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;
IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;
IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;
IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;


Serial Port Console Redirection

These submenus allow the user to confi gure the following Console Redirection
settings for a COM Port 0 or COM Port 1 as specifi ed by the user.
COM 0/COM 1
Console Redirection
Select Enabled to use a COM Port selected by the user for Console Redirection.
The options are Enabled and Disabled. (The default setting for COM0 is Disabled,
and for COM1 is Enabled.)
7-17
Chapter 7: BIOS