A+ SERVER 2122TG-HIBQRF/HTRF USER'S MANUAL
Front Control Panel
SC217 models include four front panels on the handles of the chassis which control
each of the systems. Each control panel on the A+ Server 2122TG-HIBQRF/HTRF
provides you with system monitoring and control for one server node. LEDs indicate
system power, HDD activity, network activity, system overheat and power supply
failure. A main power button and a system reset button are also included.
Rear I/O
Each computing node provides a low-profile expansion card slot, a COM port, a
VGA port, two USB 2.0 ports, one IPMI Ethernet port, two gigabit Ethernet ports
and one Infiniband port per node (2122TG-HIBQRF only).
Cooling System
The SC217 chassis accepts four system fans powered from the backplane. When
Node A and/or Node B are powered on, both fans on the left of the chassis will
run. When Node C and/or Node D are powered on, both fans on the right of the
chassis will run.
Air Shrouds
The SC217 chassis includes four mylar air shrouds that direct the airflow where
cooling is needed on each serverboard. Always use the air shroud included with
your chassis on each serverboard.
Mounting Rails
The SC217 includes a set of quick-release rails, and can be placed in a rack for
secure storage and use. To setup your rack, follow the step-by-step instructions
included in this manual.
1-4