South Bridge - Supero SUPERSERVER 6027R-TRF User Manual

SUPERSERVER 6027R-TRF USER'S MANUAL
Demand Scrub
Demand Scrubbing is a process that allows the CPU to correct correctable
memory errors found on a memory module. When the CPU or I/O issues a
demand-read command, and the read data from memory turns out to be a
correctable error, the error is corrected and sent to the requestor (the original
source). Memory is updated as well. Select Enabled to use Demand Scrubbing
for ECC memory correction. The options are Enabled and Disabled.
Data Scrambling
Select Enabled to enable data scrubbing and ensure data security and integrity.
The options are Disabled and Enabled.
DRAM RAPL
RAPL which stands for Running Average Power Limit is a feature that provides
mechanisms to enforce power consumption limits on supported processors The
options are Mode 0, MODE1, and Disabled.
Device Tagging
Select Enabled to support device tagging. The options are Disabled and
Enabled.
Thermal Throttling
Throttling improves reliability and reduces power consumption in the processor
via automatic voltage control during processor idle states. The options are
Disabled and CLTT (Closed Loop Thermal Throttling).
OLTT Peak BW %
Use this feature to set a percentage of the peak bandwidth allowed for OLTT.
Enter a number between 25 to 100 (%).The default setting is 50.


South Bridge

This feature allows the user to confi gure the settings for the Intel PCH chip.
PCH Information
This feature displays the following PCH information.
•
Name: This item displays the name of the PCH chip.
•
Stepping: This item displays the status of the PCH stepping.
7-12