Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SUPERSERVER 6027R-TRF
Installation and maintainance should be performed by experienced technicians only.
The SUPERSERVER 6027R-TRF is a high-end server based on the
SC825TS-R740LPBP 2U rackmount chassis and the X9DRi-F dual processor
serverboard.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X9DRi-F serverboard and
the SC825TS-R740LPBP chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6027R-TRF
into a rack and check out the server confi guration prior to powering up the system.
If your server was ordered without processor and memory components, this chapter
will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 6027R-TRF.
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the X9DRi-F serverboard, including the
locations and functions of connections, headers and jumpers. Refer to this chapter
when adding or removing processors or main memory and when reconfi guring the
serverboard.
Preface
iii
Preface
Advertisement
Table of Contents
