Table of Contents
Advertisement
Video Connection
A Video (VGA) port is located next to
LAN2 on the I/O backplane. Refer to
the board layout below for the location.
Universal Serial Bus (USB)
Four Universal Serial Bus ports (USB
0/1, USB 2/3) are located on the I/O
back panel. Please note that BP USB
2/3 can also be used for PS2 Keyboard/
Mouse connections. In addition, three
USB headers, located close to the
IO Hub, provides six front-accessible
USB connections (USB 4/5, USB 8/9,
USB 10/11). One Type A connector
(USB6) also supports front panel USB
connection. (Cables are not included).
See the tables on the right for pin
defi nitions.
Ethernet Ports
Two Gigabit Ethernet ports (LAN1,
LAN2) are located on the I/O backplane
on the motherboard. In addition, an
IPMI_Dedicated LAN is located above
USB 0/1 ports on the backplane to
provide KVM support for IPMI 2.0. All
these ports accept RJ45 type cables.
Please refer to the LED Indicator
Section for LAN LED information.
Chapter 5: Advanced Serverboard Setup
FP USB (4/5, 8/9, 10/11, USB 6)
Pin Defi nitions
USB 4, 8,10, 6, 7
Pin # Defi nition
1
+5V
2
PO-
3
PO+
4
Ground
5
NC
(NC = No connection)
Pin Defi nitions
Pin# Defi nition
1
2
3
4
5
Pin Defi nition (LAN 1/2)
Pin# Defi nition
1
P2V5SB
2
TD0+
3
TD0-
4
TD1+
5
TD1-
6
TD2+
7
TD2-
8
TD3+
9
TD3-
(NC = No Connection)
5-19
USB 5, 9, 11
Pin # Defi nition
1
+5V
2
PO-
3
PO+
4
Ground
5
Key
Backplane
USB (0/1, 2/3)
+5V
PO-
PO+
Ground
NA
LAN Ports
Pin# Defi nition
10
SGND
11
Act LED
12
P3V3SB
13
Link 100 LED
(Yellow, +3V3SB)
14
Link 1000 LED
(Yellow, +3V3SB)
15
Ground
16
Ground
17
Ground
18
Ground
Advertisement
Table of Contents
