Administrator Settings; Administrator Setting List; Using The Administrator Settings - Sharp MX-M350U Operation Manual

ADMINISTRATOR SETTINGS

This chapter explains administrator settings for the network scanner and Internet fax functions. For information on
general administrator settings and administrator settings for the copy and document filing functions, see the
administrator settings guide.

ADMINISTRATOR SETTING LIST

Setting name
Operation settings
Default display settings
The number of direct address/sender
keys displayed setting
Must input next address key at
broadcast setting
The number of file name/subject keys
displayed setting
Initial resolution setting
Scan complete sound setting
Default exposure settings
Scan settings
Default sender set
Compression mode at broadcasting
Initial file format setting
Maximum size of data attachments
BCC setting

USING THE ADMINISTRATOR SETTINGS

Follow the steps below to use the administrator settings.
Press the [SYSTEM SETTINGS] key.
1
SYSTEM
B STATUS SETTINGS
2 Touch the [ADMINISTRATOR SETTINGS]
key.
DEFAULT
LIST PRINT
SETTINGS
FAX DATA
SENDER CONTROL
RECEIVE/FORWA
ADMINISTRATOR SETTINGS
Page I-Fax settings
I-Fax default settings
8-4
Set I-Fax own name and address
I-Fax speaker volume settings
8-4
Auto wake up print
Original print on transaction report
8-4
Transaction report print select setting
Activity report print select setting
8-4
Body text print select setting
8-4
I-Fax send settings
8-5
I-Fax reception report on/off setting
8-5
I-Fax reception report request timeout
setting
8-5
Rotation sending setting
8-5
Printing page number at receiver
8-5
Maximum size of data attachments
8-5
Number of resend times at reception
8-5
error
I-Fax receive settings
Auto receive reduce setting
Reception check interval setting
Duplex reception setting
Print style setting
Set address for data forwarding
POP3 communication timeout setting
I-Fax output tray setting
Anti junk mail/domain name setting
Use the numeric keys to enter the five-digit
3
administrator password.
ADMINISTRATOR PASSWORD
4 Touch the [IMAGE SEND SETTINGS] key.
CONTROL
DEVICE CONTROL
IMAGE SEND
SETTINGS
8-2
For the factory default
setting
administrator password,
see page 2 of the
administrator
guide.
CONTROL
COPY
SETTINGS
DOC. FILING
SETTINGS
8-6
8-6
8-6
8-6
8-6
8-7
8-7
8-7
8-7
8-7
8-8
8-8
8-8
8-8
8-8
8-9
8-9
8-9
8-9
8-9
8-9
for the
settings