Sharp MX-M350U Operation Manual page 61

Touch the [OK] key.
8
ATA SET CANCEL
OK
1/4
NOTES
● When metadata send settings are configured, the [DATA ENTRY] key is highlighted. If you do not wish to send
metadata, cancel the metadata settings and then perform the transmission in the desired mode.
● Before configuring metadata settings, you can specify addresses in all modes to be used. After metadata
settings have been configured, only addresses in modes that are allowed in the selected metadata set can be
specified.
● Metadata delivery is possible using the document filing function. The [DATA ENTRY] key appears in the
transmission settings screen of document filing mode to allow metadata delivery. In addition, metadata delivery
using document filing can be performed in [Folder/Job Operate] in the Web pages.
Select image settings and any other
9
settings, and perform the scan send
procedure.
READY TO SEND
.
(METADATA SEND MODE)
AUTO
EXPOSURE
200 x 200dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
AUTO A4
ORIGINAL
● The procedures for selecting settings and
performing transmission are the same as in the
other modes.
● To change an entered value, touch the [DATA
ENTRY] key again. The entry screen for the
selected metadata set will appear.
5-5
TRANSMITTING METADATA
RESEND
SCAN
ADDRESS BOOK
MODE SWITCH
ADDRESS REVIEW
DATA ENTRY
SPECIAL MODES
ADDRESS ENTRY FILE
QUICK FILE
SEND SETTINGS