Selecting The File Format - Sharp MX-M350U Operation Manual

SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION AND FILE FORMAT)
For resolution other than [200x200dpi], the [HALF
TONE] key can be selected.
INTERNET-FAX mode
READY TO SEND.
AUTO
STANDARD
EXPOSURE
FINE
RESOLUTION
SUPER FINE
ULTRA FINE
AUTO
ORIGINAL
600 x 600dpi
Five selections are available for the resolution.
Touch the desired resolution key depending on the
original to be scanned.
For resolutions other than [STANDARD], the
[HALF TONE] key can be selected.

SELECTING THE FILE FORMAT

When you send an image to one or more recipients, the [FILE FORMAT] key enables you to temporarily override the
individual file format settings (FILE TYPE / COMPRESSION MODE) stored for each recipient and send the image
to all of the recipients using a single file format setting.
"PDF MMR (G4)" is initially selected.
NOTE
This function cannot be used in Internet fax mode.
Touch the [FILE FORMAT] key.
1
EXPOSURE
300 x 300dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
AUTO A4
ORIGINAL
2 Select the file type and the compression mode.
READY TO SEND.
AUTO
EXPOSURE
FILE TYPE
300 x 300dpi
RESOLUTION
PDF TIFF
PROGRAMMED
FILE FORMAT
AUTO A4
SPECIFIED PAGES PER FILE
ORIGINAL
(a)
(a) When the "SPECIFIED PAGES PER FILE"
checkbox is not selected, all scanned pages
are combined into a single file. When the
checkbox is selected, one file is created per
page from pages specified with.
(b) Touch the or
pages from which a file is created.
OK
200 x 100
dpi
( )
200 x 200
200 x 400
HALF TONE
400 x 400
600 x 600
"SELECT A FILE FORMAT
TO APPLY IT TO ALL
SCAN DESTINATIONS."
will appear in the message
screen. Touch the [OK]
key.
RESEND
OK
COMPRESSION MODE
NONE
MH ( G3 )
MMR G4
( )
( 1-99 )
(b)
key to set the number of
Touch the [OK] key.
3
HALF TONE
NOTE
The initial factory resolution setting is 300x300dpi
(SCAN mode) or Standard (INTERNET-FAX mode).
If desired, you can change the initial setting to a
different setting using the administrator setting,
"Initial resolution setting"
Touch the [OK] key.
3
COMPRESSION MODE
NONE
MH
MMR G4
( )
1-99
( )
PER FILE
NOTES
● The initial file format setting can be changed with
the administrator setting "Initial file format setting"
(page 8-5).
● Even if you change the settings in the FILE
FORMAT setting screen, you can return to the
settings stored for each recipient by selecting
"PROGRAMMED"
[PROGRAMMED] key returns the file type to the
stored file format settings.
● When you perform a broadcast transmission, the
compression mode selected in the administrator
setting, "Compression mode at broadcasting"
(page 8-5), has precedence over the others.
2-19
You will return to the
OK
initial screen.
(page 8-4).
You will return to the
OK
initial screen.
G3
( )
once again. The