Sharp MX-M350U Operation Manual page 45

■ USING CARD SHOT
1 Switch to the desired mode and touch the
[SPECIAL MODES] key.
ADDRESS REVIEW
SPECIAL MODES
ENTRY FILE
TTINGS
QUICK FILE
2 Touch the [CARD SHOT] key.
DUAL PAGE
ERASE
SCAN
CARD SHOT
2in1
3 Enter the X dimension (width) and Y
dimension (length) of the original with the
keys.
OK
CANCEL
OK
SIZE RESET
FIT TO
SEND SIZE
●X (width) is initially selected. Enter X and then
touch the Y ( ) key to enter Y.
●To return the X and Y values to the initial
settings configured in the administrator
settings, touch the [SIZE RESET] key.
(Administrator settings guide "Card shot
settings" on page 17)
●To have the images enlarged or reduced by a
suitable ratio based on the entered original
size and transmission size so that the front
and back sides fit into the transmission size,
touch the [FIT TO SEND SIZE] key.
●To cancel the card shot function, touch the
[CANCEL] key.
NOTE
When "FIT TO SEND SIZE" is selected, even if a
large transmission size is selected and the original
is extremely small, the image will be enlarged to
400% or less.
If the address book screen
appears, touch the
[CONDITION SETTINGS]
key to display the
condition settings screen
(page 1-13).
The card shot screen
appears.
3-9
4 Touch the outer [OK] key.
OK
CANCEL
OK
SIZE RESET
FIT TO
SEND SIZE
Place the original on the document glass.
5
6 Perform the send procedure as explained
in "SENDING AN IMAGE".
●In scan mode, perform the procedure in
"SENDING AN IMAGE IN SCAN MODE"
through step 22 (page
●In Internet fax mode, perform the procedure in
"SENDING A FAX IN INTERNET FAX MODE"
through step 18 (page
7 Press the [START] key.
8 Place the back side of the original face
down on the document glass. (see step 5)
9 Press the [START] key.
Touch the [READ-END] key.
10
A beep will sound to inform you that the
transmission was stored.
NOTE
To cancel card shot...
Touch the [CANCEL] key in the card shot settings
screen.
SPECIAL MODES
You will return to the
screen of step 1 and a
card shot icon will
appear next to the
[EXPOSURE] key.
Place the front side of
the original face down
and close the document
cover.
2-2).
2-6).
The front side of the card
is scanned.
The back side of the
card is scanned.