Single Page (2In1) - Sharp MX-M350U Operation Manual

TRANSMITTING TWO ORIGINAL PAGES AS A SINGLE PAGE
(2IN1)
This function allows you to reduce the size of original pages by one half to fit two pages evenly on one page when
transmitting.
Your machine
Originals
4th page
3rd page
2nd page
1st page
Portrait original
A3 and B4 (11" x 17", 8-1/2" x 14",
and 8-1/2" x 13") sizes cannot be
transmitted when using the 2 in 1
function. A4 (8-1/2" x 11") and smaller
sizes can be used. There are
restrictions on how the originals are
placed. Both portrait and landscape
oriented originals should be placed
vertically as shown below.
USING THE AUTOMATIC
DOCUMENT FEEDER
A4
USING THE DOCUMENT GLASS
A4
Place the original vertically
placed horizontally
will appear.
NOTES
● After "2in1" is selected, the send size can be changed. For the procedure for changing the send size, see
2-17.
● Transmission is not possible if the image is too large to fit into the transmission size.
4th page
3rd page
Transmission to
2nd page
1st page
Landscape original
Your machine
Portrait original
1st page 2nd page 3rd page 4th page
Landscape original
1st page 2nd page 3rd page 4th page
. If
, an alarm
The other machine
Reduced to two pages
other machine
1st page
1st page 2nd page
1st page 2nd page
1st page 2nd page
1st page 2nd page
3-7
SPECIAL MODES
2nd page
The other machine
The arrangement
of the images
varies depending
on how
original is placed
in the transmitting
machine.
The arrangement
of the images
varies depending
on how
original is placed
in the transmitting
machine.
the
the
page