Selecting The Exposure; Selecting The Resolution - Sharp MX-M350U Operation Manual

SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION AND FILE FORMAT)

SELECTING THE EXPOSURE

You can adjust the exposure manually to match the type of original. After loading the original in image send mode,
follow the steps below. The default setting for the exposure is "AUTO".
■ Change the exposure
1 Touch the [EXPOSURE] key.
AUTO
EXPOSURE
300 x 300dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
AUTO A4
2 Select [AUTO] or [MANUAL].
AUTO
MANUAL
1 3 5
AUTO MANUAL
1 3 5

SELECTING THE RESOLUTION

The resolution for scanning an original can be selected. Load the original in image send mode and then follow the
steps below. The default setting for the resolution is "300x300dpi" (SCAN mode) or "STANDARD" (INTERNET-FAX
mode).
■ Change the resolution
1 Touch the [RESOLUTION] key.
AUTO
EXPOSURE
300 x 300dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
AUTO A4
If you selected [AUTO],
O
the exposure will be
adjusted automatically.
If you selected
O
[MANUAL], touch the
or key to adjust
the exposure. (For
darker contrast, touch
the key. For lighter
contrast, touch the
key.)
3 Touch the [OK] key.
AUTO
MANUAL
1 3 5
NOTE
The default value of exposure can be set using the
administrator setting, "Default exposure settings"
(page 8-5).
2 Touch the desired resolution key.
SCAN mode
READY TO SEND.
AUTO
EXPOSURE
RESOLUTION
PROGRAMMED
FILE FORMAT
AUTO
ORIGINAL
Four selections are available for the resolution.
Touch the desired resolution key depending on the
original to be scanned.
The selected key is highlighted.
2-18
You will return to the
OK
initial screen.
OK
200 x 200dpi
300 x 300dpi
400 x 400dpi HALF TONE
600 x 600dpi