Table of Contents
Advertisement
Windows-based Control Program, Cont'd
Setting and using presets
The ICS100 Control Program can be used to create, view, save, recall, label, and
clear presets for the MSG matrix switcher. Up to 32 presets can be set using this
program. For tasks in addition to those detailed below, access the Help system
from the Interface screen.
Viewing existing presets
Select Presets from the Controls drop-down menu. The Preset Panel window
opens. Existing presets are labeled and shown on this screen.
Creating a preset
1.
2.
3.
4.
Recalling a preset
1.
2.
3.
Opening the Options menu
Click the Controls option on the menu bar. A drop-down menu listing the various
options available to your switcher is displayed.
Enabling/disabling front panel control
The current state of front panel control is indicated by the presence or absence of a
check mark next to Front Panel Enable on the Options menu. If a check mark
appears, front panel controls are enabled. If a check mark does not appear, front
panel controls are disabled. To toggle front panel controls on or off, click Front
Panel Enable with your mouse pointer.
4-6
MSG Matrix Switchers • Windows-based Control Program
Set up the I/O configuration for the preset in the Control Panel.
Select Presets from the Controls drop-down menu. The Presets window
opens.
Figure 4-6 — ICS100 Presets window
Right-click on the number you want to assign to the preset, then click the Save
button. The preset is saved to the selected number.
Close the Presets window.
Select Presets from the Controls drop-down menu. The Presets window
opens.
Click on the number of the preset you want to recall, then press the Recall
button. The preset configuration is activated.
Close the Presets window.
Advertisement
Table of Contents
