Ctl120-2 Ir Remote Control - Extron electronics MSG0804 User Manual

CTL120-2 IR Remote Control

The CTL120-2 IR Remote Control sends infrared commands to the built-in infrared
receiver in the MSG switchers to control various switcher functions. The
illustration below shows the location and function of each button on the Remote
Control unit that can be used to control the MSG matrix switchers.
Initially, press the Matrix button on the Remote Control unit to change it to matrix
switcher mode.
To switch to a new input/output configuration using the CTL120-2 Remote
Control:
1. Press the button on the remote control unit that corresponds to the desired
output select button.
2. Press the button on the remote control unit that corresponds to the desired
input that you want to connect to the output.
3. Press the Enter button to confirm the configuration.
Matrix Button
Press this button first
to set the CTL120-2
to control the MSG0804 or
MSG0808 matrix switchers
Numeric Buttons
Press to select desired
output, then to select
desired input
Press the Enter button to
confirm the configuration
Figure 5-3 — CTL120-2 Infrared Remote Control
Important!
Press this button first!
MATRIX
S
VIDEO
SCALER SWITCHER MATRIX AUDIO
1 2 3
4 5 6
7 8 9
ENTER
PIP 0 ENT
INPUT RECALL
FREEZE
MENU OK
MENU ENTER
CH VOL
BLANK MUTE
MSG Matrix Switchers • Remote Control
"0" Button
Press to blank the
currently selected input
Enter Button
Press to make menu
selection, or to execute
a new setting when using
on-screen commands
Volume Buttons
Press (+) to increase volume,
or (-) to decrease volume
Mute Button
Press to mute audio
5-11