Table of Contents
Advertisement
The QGE 100 Viewer Window
Figure 26.
The main window of the QGE 100 Viewer consists of the following major sections:
•
Source window — (Left pane) Displays the source connected to the selected
QGE 100. If no source is connected, this section displays
•
Channel list — (Right pane) Displays all QGE 100s available on the network. The
following parameters are displayed for each QGE:
Parameter
QGE 100
IP Address
Type
Protocol
Multicast Group
Port
QGE 100 Viewer Main Window
Description
Name of the QGE 100 (if assigned)
IP address of the QGE
This field always displays
Current operating mode (
(Multicast mode only) The multicast IP address currently set
The port number for multicast connection. This is normally
set to
5000
, which is the default value expected by the
QGE 100 Viewer and QGE-enabled image processors.
QGE 100 • Software Configuration and Control
Not Connected
.
.
Hardware
or
TCP Unicast
UDP Multicast
)
35
Advertisement
Table of Contents
