Viewing A Qge 100 Source - Extron electronics QGE 100 User Manual

Viewing a QGE 100 Source

The QGE 100 Administrator provides a Viewer window on which you can view a
connected source. You can also view sources using the QGE 100 Viewer software (see
"Using the QGE 100 Viewer
You can display the source that is connected to any QGE 100 in the list as follows:
1.
Select a QGE in the list that you want to view.
2.
Connect the Administrator software to the selected QGE by any of the following
methods:
Click the
•
Double-click the name of the QGE in the list.
•
Select
•
The Viewer window opens, displaying the selected source. If no source computer is
connected to the selected QGE, the Viewer window displays the message
The Administrator Viewer window
The Administrator Viewer window opens whenever your computer is connected to a
QGE 100, whether or not a source device is connected to the QGE. Multiple QGEs can be
selected and have their Viewer windows open at the same time.
Figure 15.
Program" on page 34).
button in the Task section.
Connect
from the
Connect Connection
Administrator Software Viewer Window Example
QGE 100 • Software Configuration and Control
menu.
.
No Source
24