Front Panel Features
2
Figure 12.
The QGE 100 front panel contains three indicator LEDs:
a
b
c
NOTE:
1
LAN
STATUS
3
QGE 100 Front Panel
Power LED — This green LED lights steadily when the unit is receiving power from
the power supply.
LAN LED — This orange led indicates the status of the Ethernet connection:
Blinking irregularly: Data is being transmitted across the network.
•
Unlit: No data is being transmitted from the source, or no source is connected.
•
Status LED — This orange LED indicates the internal status of the QGE 100:
Lit steadily: The unit is connected to a valid source and is functioning normally.
•
Blinking regularly: The unit is functioning normally, but no source is connected
•
to it.
Unlit: The unit is not functioning correctly.
•
When the QGE 100 is powered on, the three LEDs light steadily for
approximately 10 seconds while the unit initializes.
QUANTUM GRAPHICS ENCODER
QGE 100 • Installation and Maintenance
QGE 100
17