Table of Contents
Advertisement
Configuring a QGE 100
The Configure QGE 100 Properties section of the main window contains fields in which
you can specify or change various properties of a selected QGE 100.
NOTE:
Figure 20.
To change any of the settings described in the following sections, follow this general
procedure:
1.
Log in at the administrator level.
2.
From the QGE 100 List, select the name of the device that you want to configure.
3.
If required for the setting you want to change, click the
button (located in the Network Settings section of the main window).
4.
Enter new settings as desired.
5.
When finished, click the
implement your changes.
Configuring performance settings
In the Performance Settings section, select the desired bandwidth and frame (refresh) rates
of the QGE from the
"Optimizing the Encoder
information). Your selections are displayed on the status bar at the bottom of the Viewer
window.
Figure 21.
You can show or hide this information by selecting
menu on either the Administrator window or the QGE 100 Viewer window (see
View
"Administrator Viewer menu
Configuring network settings
The settings displayed in the Information for Selected QGE 100 subsection are for viewing
only; they cannot be changed directly from the main window. To access these and
additional network settings for the selected QGE 100:
1.
Click
Advanced Network Settings
illustration
2.
Configure the settings on this window as desired.
3.
When finished, click
You must be logged in as Administrator in order to edit these sections (see
"Logging In and Out (Administrator
Configure QGE 100 Properties Section of the Administrator Window
button in the lower-right corner of the window to
Apply
Bandwidth Limit
Parameters" in the "Reference Information" section for more
Example of Frame Rate and Bandwidth Information on the Status Bar
options" on page 25).
on the next page).
to save your settings.
OK
QGE 100 • Software Configuration and Control
Level)" on the previous page).
Advanced Network Settings
and
drop-down menus (see
Frame Rate Limit
Frame Rate and Bandwidth
. The Network Settings window opens (see the
from the
29
Advertisement
Table of Contents
