im Vertrieb von
Window Effect submenu
Window Priority submenu
Temperature submenu
Genlock Configuration menu (PIP 444 only)
www.camboard.de
CAMBOARD Electronics
Use this submenu to select a transition effect for the PIP to use when enabling,
disabling, or swapping windows. You can choose from the following three options:
Cut — The window turns seamlessly on and off. No effect is applied to the
transition. This is the default setting.
Wipe — The window appears to unroll over the old screen, from left to right.
Dissolve — The window appears to dissolve on or off.
The wipe and dissolve effects are set to a fixed 0.5 second transition interval,
which cannot be changed.
The Window Priority submenu allows you to set how the windows
will overlap one another. The submenu lists the inputs in order of
their priority, from left to right. The input that appears in the
leftmost position in the submenu will appear in front of all the other
windows. Rotate the Adjust
Rotate the Adjust
knob to set the priority of the input.
This display only submenu shows the temperature of the PIP in degrees Fahrenheit
and Celsius.
The Temperature submenu is available only on newer models.
Figure 3-8 is a flowchart that shows an overview of the Genlock Configuration
menu, the submenus, and the available settings.
NOTE
The PIP returns to
the last active main
menu or submenu
when you press Menu.
Advanced
*PIP 444 only
Menu
To exit menu
press NEXT
Figure 3-8 — Genlock Configuration menu flowchart
The Genlock Configuration menu allows you to align the horizontal phase and
color subcarrier phase of the output signal with those of the genlock reference
(black burst) signal. Rotate the Adjust
the Adjust
knob to align the subcarrier phase through a range from 0 to 255.
Tel. 07131 911201
PIP 422 and PIP 444 Picture-in-Picture Processors • Operation
Fax 07131 911203
knob to select an input to adjust.
Default
Cycle
Menu
20 sec.
Input
Config
Menu
Output
Config
Menu
H
Phase
000
Config
Menu
Genlock
Config*
Horizontal phase
Menu
• Align the output
horizontal phase with
the reference signal
horizontal phase.
Next
knob to align the horizontal phase and
ce-info@camboard.de
Win Priority
<
>
F
1
2 3 4 B
Window
Window
appears
appears
in front
in back
20 sec.
Next
SC
000
Subcarrier phase
• Align the output color
subcarrier phase with
the reference signal
color subcarrier phase.
3-9