Avaya C460 Default Settings - Avaya C460 Quick Start Manual

Avaya C460 Default Settings

We recommend that you use the CLI to change default parameters. Refer to the Avaya C460
documentation for more information.
Table 12
Parameter
All IP addresses
CLI timeout
User name
Password
PPP interface
Outband interface
Inband interface
Inband ARP Tx interval
Outband ARP Tx interval
VLANs
Spanning Tree
Bridge priority for Spanning Tree
NTP server IP address
Time zone offset
Timezone
Read-only SNMP community string
Read-write SNMP community string
Trap SNMP community string
Number of SNMP retries
SNMP timeout
Intelligent multicast
Boot bank
Broadcast storm control
PSU redundancy
Default System Parameters
Default Value
N/A (0.0.0.0)
15 minutes
root
root
Disabled
Disabled
Disabled
5 seconds
5 seconds
1 on all ports
Enabled
32,768
N/A
0 hours
GMT
public
public
public
3
2,000
Disabled
B
Disabled
On
5