Figure 9
To install a Supervisor module:
1
Remove the blanking plate.
2
Open the locking handles at the edge of the front panel.
3
Position the module in the slot. See Figure 9.
4
Gently slide the module in.
5
Close the locking handles.
6
Gently tighten the screws.
For information on configuring redundant supervisor modules, refer to "M460ML-SPV
Supervisor Module Redundancy" in the Avaya C460 Installation and Maintenance Guide.
Installing the C460 Supervisor Module
a
3
3
b
Key
a
Open locking handle
b
Closed locking handle
4