Table of Contents
Advertisement
Cable Guide Installation
You can use the cable guide to tidy cables from the Supervisor and I/O modules. The cable guide
is symmetric: you can install the bracket on either side of the switch.
Avaya recommends that you install the cable guide on the left side of the switch to allow
easier access to the fan module.
You need to install the rack mounting brackets before you can install the cable guides.
Install the switch in the rack before installing the cable guide.
• Secure the cable guide to the rack mounting bracket using the captive screws on the cable
holder. See Figure 7.
Figure 7
Left side of chassis
Installing the Cable Guide
a
b
Key
a
Cable Guide
b
Rack-mounting bracket
Right side of chassis
a
b
3
Advertisement
Table of Contents
