Table of Contents
Advertisement
Run the Avaya C460 Embedded Device Manager (optional)
PC System Requirements for Running the Avaya C460 Embedded Device Manager
Minimum hardware and Operating System requirements are:
• Pentium II 400 Mhz-based computer with 128 Mb of RAM
• Screen resolution of 1024 x 768 pixels
• Microsoft Internet Explorer 5 or higher
• Microsoft Windows 2000 Workstation or Windows XP
• Sun Microsystems Java plug-in (supplied on the "Documentation and Utilities" CD)
Refer to the Release Notes for the exact version of the Java plug-in
Running the Avaya C460 Embedded Device Manager
You should assign an inband or out-of-band interface IP address to the switch before
beginning this procedure.
1
Open your browser.
2
Enter the URL of the switch in the format
aaa.bbb.ccc.ddd is the inband or outband interface IP address of the switch.
The user name is "root"
The default passwords for read-write access is "root".
The C460 Manager passwords are the same as those of the CLI. If you change the
passwords of the CLI then those passwords become active for Web management as well.
For further information on the passwords, refer to the Avaya C460 Installation and
Maintenance Guide
The welcome page is displayed.
Figure 13
6
The Welcome Page
http://aaa.bbb.ccc.ddd
where
Advertisement
Table of Contents
