Table of Contents
Advertisement
5. Press Enter to save the destination and gateway IP addresses.
Avaya P330 Default Settings
If you wish to change the default parameters shown and configure the mandatory parameters,
we recommend that you use the Command Line Interface (CLI).
For further information, please refer to Chapter 6 of the Avaya P330 User's Guide.
The default settings for the Avaya P330 switch and its ports are determined by the Avaya P330
firmware. These default settings are subject to change in newer versions of the Avaya P330
firmware. See the P330 Release Notes for the most up-to-date settings.
Table 6: Default Switch Settings
Function
IP address
BootP mode
Subnet Mask
Default gateway
Management PC SLIP IP Address
Management VLAN ID
Spanning tree
TFTP Mode
TFTP Server
TFTP File Name
SNMPv1 communities:
Read-only
Read-write
Trap SNMP
SNMP authentication trap
CLI timeout
User Name/Password
Configuring the Switch
Default Setting
149.49.32.134
Never
255.255.255.0
0.0.0.0
192.168.10.2
1
Enabled
Limited
0.0.0.0
viisa
Public
Public
Public
Disabled
15 Minutes
root/root
Issue 1 September 2005
27
Advertisement
Table of Contents
