Avaya one-X 1600 Series Installation And Maintenance Manual page 70

Restart Scenarios
Note:
The Ethernet speed indicated is the LAN interface speed for both the telephone
Note:
and any attached PC, assuming the administrator has not disabled the latter
interface through the PHY2STAT setting.
The software determines whether sufficient IP address information was downloaded. In this
scenario, it is discovered that sufficient information has not been downloaded. The
following message displays while the DHCP process is invoked:
DHCP: 0 secs
* to program
The number of elapsed seconds is incremented once per second, until DHCP successfully
completes.
While the IP telephone establishes a TCP connection to the HTTP server, the telephone
displays the following message:
HTTP:n ipadd
where n is the number of the IP address obtained from the HTTP server and ipadd is the IP
address.
The following message displays while the HTTP process is invoked:
HTTP: n uri
The number increments once per second, until the HTTP server responds.
While the upgrade script file is being downloaded, all IP telephones display the following
message:
HTTP:n sc etag
where n is the number of the IP address obtained from the HTTP server, sc is the status
code of the HTTP response and etag is the value of the ETag header.
The script file is processed. The software determines that the telephone's boot code file
name (BOOTNAME) is not the latest version. APPNAME is set to the name of an
70 Avaya one-X™ Deskphone Value Edition 1600 Series IP Telephones Installation and Maintenance Guide