Self-Test Procedure - Avaya one-X 1600 Series Installation And Maintenance Manual

Local Administrative Options

Self-Test Procedure

Note:
1600 Series IP Telephones store two software code images in reprogrammable
Note:
non-volatile memory. The primary image, called the "big app" must be running to
perform a self-test. The backup image, called the "little app" does not support the
self-test.
For self-testing, use the following procedure:
1. To invoke 1600 Series IP Telephone self-test procedures, press the following sequence of
keys on the faceplate of the telephone:
Mute 8 3 7 8 # (Mute T E S T #)
Note:
Press the Mute button momentarily. Do not press this button while pressing other
Note:
keys/buttons.
All telephones show the following text, left-justified at the top of the display, for 1 second
after self-test is invoked:
Self test
#=end
A block character with all pixels on then displays in all display character locations for
5 seconds. Display of the block character helps to find bad display pixels.
The telephone displays one of the following:
If self-test passes:
If self-test fails:
2. To terminate the self-test, press the # button on the dial pad at any time. Doing so generates
a confirmation tone, and returns the user interface to its previous state.
46 Avaya one-X™ Deskphone Value Edition 1600 Series IP Telephones Installation and Maintenance Guide
Self test passed
#=end
Self test failed
#=end