Disable/Enable Automatic Gain Control - Avaya one-X 1600 Series Installation And Maintenance Manual

Local Administrative Options
10. Enter a valid value between 0 and 999 for the new value of the DHCPOFFER wait period.
The telephone displays:
Save new values?
*=no #=yes
11. Press the # button to save the new values you entered.
The telephone displays:
New values
being saved
Once the new values are stored, the telephone is reset.
If a new boot program is downloaded from the HTTP server after you enter static
addressing information, you must reenter your static addressing information.

Disable/Enable Automatic Gain Control

Use the following procedure to turn automatic gain control for the handset, headset, and/or the
Speaker on or off.
Note:
The user can potentially override the AGC local procedure settings, as described
Note:
in the telephone user guide. If overridden, the backup file stores the AGC
value(s) set by the user and ignores any setting established using this local
procedure.
1. While the telephone is on-hook and idle, press the following sequence of keys on the
faceplate of the telephone:
Mute 2 4 2 # (Mute A G C #)
Note:
Press the Mute button momentarily. Do not press this button while pressing other
Note:
keys/buttons.
2. After entry of the command sequence, one of the following displays, based on the current
value of the system value AGCHAND:
If AGCHAND = 1:
If AGCHAND = 0:
32 Avaya one-X™ Deskphone Value Edition 1600 Series IP Telephones Installation and Maintenance Guide
Handset AGC=on
0=off #=OK
Handset AGC=off
1=on #=OK