Configuring Visual Alerts; Setting The Audio Path - Avaya one-X User Manual

Configuring visual alerts

When the Visual Alerting option is turned on, incoming calls cause the LED in the top right
corner of the phone to flash. You can turn Visual Alerting on or off.
1. Press Home.
2. Select Options & Settings...
3. Select Call Settings.
4.
5. Press Select or OK.
6. Select Visual Alerting.
7. Press Change or OK or use the Right/Left arrows to turn Visual Alerting on or off.
8. Press Save.

Setting the audio path

You can set your phone to go off-hook on the Speaker or the Headset when you make an on-
hook call.If your system administrator has set up auto-answer, incoming calls are also
answered on the default audio path you designate here.
1. Press Home.
2. Select Options & Settings or Phone Settings.
3. Select Options & Settings...
4. Press Select or OK.
5. Select Call Settings.
6. Press Select or OK.
7. Select Audio Path.
8. Press Change or OK or use the Right/Left arrows to change the Speaker or
9. Press Save.
™
Avaya one-X Deskphone SIP for 9608/9611G IP Telephone User Guide
Headset setting.
Options & Settings
September 2010 19