HP PROBOOK 4520S Maintenance And Service Manual page 68
Notebook pc
Hide thumbs
Also See for PROBOOK 4520S:
- Maintenance and service manual (177 pages) ,
- Quickspecs (39 pages) ,
- Brochure (4 pages)
Table of Contents
Advertisement
5.
Remove the two Phillips PM2.5×5.0 screws that secure the keyboard to the computer.
6.
Slide the keyboard back toward the display (1), and then rotate it forward (2) until it rests upside-
down on the palm rest.
7.
Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and
disconnect the keyboard cable (2) from the system board.
NOTE:
keyboard or removing the top cover. It is not recommended that you disconnect the cable unless it
is absolutely necessary.
58
Chapter 4 Removal and replacement procedures
Only disconnect the keyboard cable from the system board when replacing the
Hide quick links:
Advertisement
Table of Contents
