HP PROBOOK 4520S Maintenance And Service Manual page 140

Select
Built-In Device Options
130 Chapter 5 Computer Setup
To do this
● Enable/disable the wireless button state (enabled by
default).
● Enable/disable embedded WWAN device (select
models only; enabled by default).
● Enable/disable embedded WLAN device (enabled by
default).
● Enable/disable embedded Bluetooth device (enabled by
default).
● Enable/disable the network interface controller (LAN)
(enabled by default).
● Enable/disable LAN/WLAN switching (disabled by
default).
● Set the wake on LAN state. Options include the
following:
◦ Disabled
◦
Boot to Network (default setting)
◦ Follow Boot Order
●
Enable/disable the ambient light sensor (enabled by
default).
●
Enable/disable the notebook upgrade bay device
(enabled by default).
●
Enable/disable the fingerprint device (enabled by
default).
●
Enable/disable the integrated camera (enabled by
default).
●
Enable/disable the power monitor circuit (enabled by
default).
●
Enable/disable the audio device (enabled by default).
● Enable/disable a modem device (enabled by default).
●
Enable/disable the microphone (enabled by default).
●
Enable/disable the internal speakers (enabled by
default).