System Configuration Menu - HP PROBOOK 4520S Maintenance And Service Manual

System Configuration menu

NOTE:
Some of the listed System Configuration options may not be supported by your computer or
your operating system.
Select
Language
Boot Options
To do this
Change the Computer Setup language.
●
Set a startup menu delay (in seconds).
● Set the MultiBoot Express Boot Popup delay in seconds.
●
Enable/disable custom logo (disabled by default).
● Enable/disable display diagnostic URL (enabled by
default).
● Enable/disable CD-ROM boot (enabled by default).
●
Enable/disable SD card boot (enabled by default).
● Enable/disable floppy boot (enabled by default).
●
Enable/disable PXE internal NIC boot (enabled by
default).
●
Enable/Disable Unified Extensible Firmware Interface
(UEFI) Boot Mode (disabled by default).
●
Set the legacy boot order.
Computer Setup 127