HP PROBOOK 4520S Maintenance And Service Manual page 109

4. Lift the display assembly up and off the computer (2).
5.
If it is necessary to replace the display bezel, display enclosure, or display hinges, remove the two
mylar screw covers (1) and the 2 Torx M2.5×6.0 screws (2) that secure the display bezel to the
display assembly. The screw covers are available in the Rubber Kit, spare part number
598678-001.
6. Flex the bottom bezel (1) around the hinge areas on the inside of the display enclosure and work
around the periphery of the bezel (2) and (3).
Component replacement procedures
99