Computer Setup; Starting Computer Setup; Using Computer Setup; Navigating And Selecting In Computer Setup - HP PROBOOK 4520S Maintenance And Service Manual

5

Computer Setup

Computer Setup

Starting Computer Setup

Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating system
is not working or will not load.
NOTE:
computer or your operating system.
NOTE:
only if USB legacy support is enabled.
To start Computer Setup, follow these steps:
1.
Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
2.
Press

Using Computer Setup

Navigating and selecting in Computer Setup

The information and settings in Computer Setup are accessed from the File, Security, and System
Configuration menus.
To navigate and select in Computer Setup, follow these steps:
1. Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
●
●
●
122 Chapter 5 Computer Setup
Some of the Computer Setup menu items listed in this guide may not be supported by your
An external keyboard or mouse connected to a USB port can be used with Computer Setup
f10 to enter BIOS Setup.
To select a menu or a menu item, use the tab key and the keyboard arrow keys and then
press enter, or use a pointing device to click the item.
To scroll up and down, click the up arrow or the down arrow in the upper-right corner of the
screen, or use the up arrow key or the down arrow key.
To close open dialog boxes and return to the main Computer Setup screen, press esc, and
then follow the on-screen instructions.
esc while the "Press the ESC key for Startup Menu"
esc while the "Press the ESC key for Startup Menu"