1. Manuals
  2. Brands
  3. HP Manuals
  4. Laptop
  5. ProBook 4525s - Notebook PC
  6. User manual

HP ProBook 4525s - Notebook PC User Manual

Hp probook notebook pc user guide - linux
Hide thumbs Also See for ProBook 4525s - Notebook PC:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Maintenance and Service Manual, Reference Manual
HP ProBook Notebook PC
User Guide

Advertisement

Table of Contents
loading

Related Manuals for HP ProBook 4525s - Notebook PC

Summary of Contents for HP ProBook 4525s - Notebook PC

  • Page 1 HP ProBook Notebook PC User Guide...
  • Page 2 This user guide describes features that are Bluetooth is a trademark owned by its common to most models. Some features proprietor and used by Hewlett-Packard may not be available on your computer. Company under license. SD Logo is a trademark of its proprietor.
  • Page 3 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
  • Page 4 Safety warning notice...

  • Page 5: Table Of Contents

    Table of contents 1 Features ................................1 Identifying hardware ..........................1 Top components ........................1 TouchPad ......................1 Lights ........................2 Buttons, speakers, switches, and fingerprint reader (select models only) ..3 Keys ........................5 Front components ........................ 6 Right-side components ......................6 Left-side components ......................
  • Page 6 Cleaning the TouchPad and keyboard ....................17 3 Multimedia ..............................19 Multimedia features ..........................19 Identifying your multimedia components ................19 Adjusting the volume ......................20 Multimedia software ........................... 21 Accessing your preinstalled multimedia software .............. 22 Installing multimedia software from a disc ................. 22 Audio ..............................
  • Page 7 Using battery power ........................... 33 Inserting or removing the battery ..................34 Charging a battery ......................35 Maximizing battery discharge time ..................36 Managing low battery levels ....................36 Identifying low battery levels ................36 Resolving a low battery level ................36 Resolving a low battery level when external power is available ..
  • Page 8 7 External media cards ............................ 61 Using Media Card Reader cards ......................61 Inserting a digital card ......................61 Removing a digital card ..................... 62 Using ExpressCards (select models only) ..................62 Configuring an ExpressCard ....................62 Inserting an ExpressCard ....................62 Removing an ExpressCard ....................
  • Page 9 Diagnostics menu ......................86 System Configuration menu ....................87 Index ................................... 89...

  • Page 11: Features

    Features Identifying hardware To see a list of hardware installed in the computer, select Computer > Control Center > ▲ YaST > Hardware Information. Top components TouchPad Component Description TouchPad off indicator To turn the TouchPad zone on and off, quickly double-tap the TouchPad off indicator.

  • Page 12: Lights

    Lights NOTE: Refer to the illustration that most closely matches your computer. Component Description ● TouchPad off indicator Amber: The TouchPad is off. ● Off: The TouchPad is on. Caps lock light On: Caps lock is on. E-mail client light Blinking: Launching Evolution e-mail client.

  • Page 13: Buttons, Speakers, Switches, And Fingerprint Reader (Select Models Only)

    Component Description Power light ● On: The computer is on. ● Blinking: The computer is in the Suspend state. ● Off: The computer is off or in Hibernation. Wireless light ● White: An integrated wireless device, such as a wireless local area network (WLAN) device and/or a Bluetooth®...
  • Page 14 Component Description Power button ● When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button to shut down the computer. ● When the computer is in the Suspend state, press the button briefly to exit Suspend.

  • Page 15: Keys

    Keys NOTE: Refer to the illustration that most closely matches your computer. Component Description Displays system information when pressed in combination with the key. Executes frequently used system functions when pressed in combination with a function key or the key. Embedded numeric keypad keys Can be used like the keys on an external numeric keypad when pressed in combination with the...

  • Page 16: Front Components

    Component Description Displays system information when pressed in combination with the key. Executes frequently used system functions when pressed in combination with a function key or the key. Integrated numeric keypad keys Can be used like the keys on an external numeric keypad. Function keys Execute frequently used system functions when pressed in combination with the...

  • Page 17: Left-Side Components

    Component Description USB ports (2) Connect optional USB devices. RJ-11 (modem) jack (select models only) Connects a modem cable. Optical drive light (select models only) Blinking: The optical drive is being accessed. Optical drive (select models only) Reads optical discs and, on select models, also writes to optical discs.
  • Page 18 Component Description Security cable slot Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Power connector Connects an AC adapter. ●...

  • Page 19: Bottom Components

    Component Description Vent Enables airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. External monitor port Connects an external VGA monitor or projector.

  • Page 20: Wireless Antennas (Select Models Only)

    Component Description Internal display switch Turns off the display if the display is closed while the power is on. Internal microphone Records sound. Webcam light (select models only) On: The webcam is in use. Webcam (select models only) Records video and captures still photographs. Wireless antennas (select models only) The antennas send and receive signals from one or more wireless devices.
  • Page 21 Component Description WWAN antennas (2)* Send and receive wireless signals to communicate with wireless wide area networks (WWANs). WLAN antennas (2)* Send and receive wireless signals to communicate with wireless local area networks (WLANs). *The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennas free from obstructions.

  • Page 22: Additional Hardware Components

    Additional hardware components Component Description Power cord* Connects an AC adapter to an AC outlet. Battery* Powers the computer when the computer is not plugged into an external power source. AC adapter Converts AC power to DC power. *Batteries and power cords vary in appearance by country or region. Identifying the labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer:...
  • Page 23 Have this information available when you contact technical support. The service tag label is affixed to the bottom of the computer. ● Regulatory label—Provides regulatory information about the computer. The regulatory label is affixed to the bottom of the computer. ●...

  • Page 24: Pointing Devices And Keyboard

    Pointing devices and keyboard Using pointing devices Setting pointing device preferences Use Mouse Properties or TouchPad to customize settings for pointing devices, such as button configuration, click speed, and pointer options. To access Mouse Properties, select Computer > Control Center > Mouse. To access TouchPad properties, select Computer >...

  • Page 25: Initiating Sleep

    Function Hotkey Initiate Sleep. fn+f1 Decrease screen brightness. fn+f2 Increase screen brightness. fn+f3 Switch the screen image. fn+f4 Open the default e-mail client. fn+f5 Open the default Web browser. fn+f6 Mute speaker sound. fn+f7 Decrease volume speaker sound. fn+f8 Increase volume speaker sound. fn+f9 Play previous track.

  • Page 26: Switching The Screen Image

    Switching the screen image Press fn+f4 to switch the screen image among display devices connected to the system. For example, if a monitor is connected to the computer, pressing fn+f4 alternates the screen image from computer display to monitor display to simultaneous display on both the computer and the monitor. Most external monitors receive video information from the computer using the external VGA video standard.

  • Page 27: Playing The Next Track Or Section Of An Audio Cd Or A Dvd

    Playing the next track or section of an audio CD or a DVD While an audio CD or a DVD is playing, press fn+f12 to play the next track of the CD or the next section of the DVD. Using the embedded numeric keypad The 15 keys of the embedded numeric keypad can be used like the keys on an external keypad.
  • Page 28 Clean the keyboard regularly to prevent keys from sticking and to remove dust, lint, and particles that can become trapped beneath the keys. A can of compressed air with a straw extension can be used to blow air around and under the keys to loosen and remove debris. Chapter 2 Pointing devices and keyboard...

  • Page 29: Multimedia

    Multimedia Multimedia features Your computer includes multimedia features that allow you to listen to music, watch movies, and view pictures. Your computer may include the following multimedia components: ● Optical drive for playing audio and video discs ● Integrated speakers for listening to music ●...

  • Page 30: Adjusting The Volume

    Component Description Internal microphone Records sound. Webcam Records video and captures still photographs. Speakers (2) Produce sound. Audio-out (headphone) jack Produces sound when connected to optional powered stereo speakers, headphones, ear buds, a headset, or television audio. NOTE: When a device is connected to the headphone jack, the computer speakers are disabled.

  • Page 31: Multimedia Software

    ◦ To increase volume, press and hold the key (1), and then tap the volume up key (4) until the desired volume level is reached. ● Operating system volume control: Click the Volume icon in the notification area, at the far right of the taskbar. Increase or decrease the volume by moving the slider up or down.

  • Page 32: Accessing Your Preinstalled Multimedia Software

    CAUTION: To prevent loss of information or damage to a disc, observe the following guidelines: Before writing to a disc, connect the computer to a reliable external power source. Do not write to a disc while the computer is running on battery power. Before writing to a disc, close all open programs except the disc software you are using.

  • Page 33: Checking Your Audio Functions

    To connect external devices, such as external speakers, headphones, or a microphone, refer to the information provided with the device. For best results, remember the following tips: ● Be sure that the device cable is securely connected to the correct jack on your computer. (Cable connectors are normally color-coded to match the corresponding jacks on the computer.) ●...

  • Page 34: Using The Hdmi Port

    To connect a display device, connect the device cable to the external monitor port. ▲ NOTE: If a properly connected external display device does not display an image, press fn+f4 transfer the image to the device. Repeatedly pressing fn+f4 alternates the screen image between the computer display and the device.

  • Page 35: Optical Drive (Select Models Only)

    To connect a video or audio device to the HDMI port: Plug one end of the HDMI cable into the HDMI port on the computer. Connect the other end of the cable to the video device, according to the device manufacturer's instructions.

  • Page 36: Selecting The Right Disc (Cds, Dvds, And Bds)

    Optical drive type Write to CD- Write to Write to DVD±R DL Write label to Write to BD R/RE DVD±RW/ LightScribe CD or DVD ±RW/R Blu-ray R/RE DVD+/- RW SuperMulti DL Drive* *Double-layer discs can store more data than single-layer discs. However, double-layer discs burned with this drive may not be compatible with many single-layer DVD drivers and players.

  • Page 37: Dvd±R Discs

    DVD±R discs Use blank DVD±R discs to permanently store large amounts of information. After data is recorded, it cannot be erased or written over. DVD±RW discs Use DVD±RW discs if you want to be able to erase or write over data that you saved earlier. This type of disc is ideal for testing audio or video recordings before you burn them to a CD or DVD that cannot be changed.

  • Page 38: Observing The Copyright Warning

    Gently press the disc (3) down onto the tray spindle until the disc snaps into place. Close the disc tray. Select Computer > More Applications. Open an audio player, such as Helix Banshee, to play the disc. NOTE: After you insert a disc, a short pause is normal. If Suspend or Hibernation is initiated during playback of a disc, you may experience the following behaviors: ●...

  • Page 39: The Optical Disc Tray Does Not Open For Removal Of A Cd, Dvd, Or Bd

    Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces. NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it. Close the disc tray and place the disc in a protective case.

  • Page 40: Webcam

    Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces. NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it. Close the disc tray and place the disc in a protective case.

  • Page 41: Power Management

    Power management Setting power options Using power-saving states The computer has two power-saving states enabled at the factory: Suspend and Hibernation. When Suspend is initiated, the power light blinks and the screen clears. Your work is saved to memory, letting you exit Suspend faster than exiting Hibernation. If the computer is in the Suspend state for an extended period or if the battery reaches a critical battery level while in the Suspend state, the computer initiates Hibernation.

  • Page 42: Using The Power Icon

    Using the Power icon The Power icon is located in the notification area, at the far right of the taskbar. The Power icon allows you to quickly access power settings, view remaining battery charge, and then select a different power plan.

  • Page 43: Connecting The Ac Adapter

    Connecting the AC adapter WARNING! To reduce the risk of electric shock or damage to the equipment: Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet (not by unplugging the power cord from the computer).

  • Page 44: Inserting Or Removing The Battery

    WARNING! To reduce potential safety issues, use only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased from HP. Computer battery life varies, depending on power management settings, programs running on the computer, display brightness, external devices connected to the computer, and other factors.

  • Page 45: Charging A Battery

    Remove the battery (2). Charging a battery WARNING! Do not charge the computer battery while you are onboard an aircraft. The battery charges whenever the computer is plugged into external power through an AC adapter, an optional power adapter, an optional expansion product, or an optional docking device (select models only).

  • Page 46: Maximizing Battery Discharge Time

    Maximizing battery discharge time Battery discharge time varies, depending on the features you use while on battery power. Maximum discharge time gradually shortens as the battery storage capacity naturally degrades. Tips for maximizing battery discharge time: ● Lower the brightness on the display. ●...

  • Page 47: Resolving A Low Battery Level When A Charged Battery Is Available

    Resolving a low battery level when a charged battery is available Turn off the computer or initiate Hibernation. Remove the discharged battery, and then insert a charged battery. Turn on the computer. Resolving a low battery level when no power source is available Initiate Hibernation.

  • Page 48: Step 2: Disable Hibernation And Suspend

    Step 2: Disable Hibernation and Suspend Click the Power icon, located on the far right of the taskbar, and then click Preferences. Under the Running on AC and Running on Battery tabs, record the current values for the following settings: ●...

  • Page 49: Step 5: Reenable Hibernation And Suspend

    Step 5: Reenable Hibernation and Suspend CAUTION: Failure to reenable Hibernation after calibration may result in a full battery discharge and information loss if the computer reaches a critical battery level. Click the Power icon, located on the far right of the taskbar, and then click Preferences. Under the Running on AC and Running on Battery tabs, reset the previously recorded values for the following settings: ●...

  • Page 50: Replacing The Battery

    Replacing the battery Computer battery life varies, depending on the power management settings, programs running on the computer, display brightness, external devices connected to the computer, and other factors. Battery Check notifies you to replace the battery when an internal cell is not charging properly, or when the battery storage capacity has reached a “weak”...
  • Page 51 If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try the following emergency procedures in the sequence provided: ● Press and hold the power button for at least 5 seconds. ● Disconnect the computer from external power and remove the battery. Shutting down the computer...

  • Page 52: Drives

    Drives Handling drives Drives are fragile computer components that must be handled with care. Refer to the following cautions before handling drives. Additional cautions are included with the procedures to which they apply. CAUTION: To reduce the risk of damage to the computer, damage to a drive, or loss of information, observe these precautions: Before you move a computer that is connected to an external hard drive, initiate Suspend and allow the screen to clear, or properly disconnect the external hard drive.

  • Page 53: Using Optional External Devices

    ● DVD-ROM Drive ● DVD+/-RW SuperMulti Double-Layer LightScribe Drive ● Blu-ray ROM DVD+/-RW SuperMulti Double-Layer LightScribe Drive Using optional external devices NOTE: For more information about required software and drivers, or to learn which computer port to use, refer to the manufacturer's instructions. To connect an external device to the computer: CAUTION: To reduce the risk of damage to the equipment when connecting a powered device, be...
  • Page 54 Remove the screws from the battery area. NOTE: Refer to the illustration that most closely matches your computer. Chapter 5 Drives...
  • Page 55 Remove the 2 screw covers (1) and screws (2) from the back edge of the computer. NOTE: Some models do not have any screw covers or screws to remove. Turn the computer display-side up, and then open the computer as far as possible. CAUTION: Do not use excessive force to open the computer beyond the limits of the display hinges.
  • Page 56 Remove the screws from the keyboard. NOTE: Refer to the illustration that most closely matches your computer. Chapter 5 Drives...
  • Page 57 Slide the keyboard back toward the display (1), and then rotate it forward (2) to gain access to the keyboard cable connector. NOTE: Refer to the illustration that most closely matches your computer. CAUTION: Do not rip the keyboard cable. –...
  • Page 58 Release the ZIF connector (1) to which the keyboard cable is attached, disconnect the keyboard cable (2) from the system board by pulling upward, and then remove the keyboard from the computer (3). NOTE: Refer to the illustration that most closely matches your computer. Chapter 5 Drives...
  • Page 59 Remove the screws from the palm rest. Slide the palm rest to the right until it disengages from the base enclosure (1), and then rest the palm rest on the computer (2). Remove the 2 hard drive screws (1), and then loosen the captive screw (2) that secures the hard drive.
  • Page 60 Lift the hard drive (4) out of the hard drive bay. To install a hard drive: Insert the hard drive into the hard drive bay (1). Use the plastic tab (2) on the hard drive to slide the hard drive to the left to connect it to the system board.
  • Page 61 Turn over the palm rest (1), resting it in the palm rest tray, and then slide the palm rest to the left to reconnect it to the base enclosure (2). Replace the screws in the palm rest. Place the keyboard upside down on the palm rest of the computer (1). Replacing the hard drive...
  • Page 62 Insert the keyboard cable (2) into the ZIF connector (3) on the system board, and then secure the connector. NOTE: Refer to the illustration that most closely matches your computer. Chapter 5 Drives...
  • Page 63 Turn over the keyboard (1) into the keyboard tray, and then slide the keyboard (2) into place. NOTE: Refer to the illustration that most closely matches your computer. Replacing the hard drive...
  • Page 64 Replace the screws on the keyboard. NOTE: Refer to the illustration that most closely matches your computer. Chapter 5 Drives...
  • Page 65 Place the switch cover on top of the switch cover tray (1), and then slide the switch cover into place (2). Close the computer display. Turn the computer upside down on a flat surface, with the battery bay toward you. Replace the 2 screws (1) and their covers (2) on the back edge of the computer.
  • Page 66 Replace the screws in the battery area. NOTE: Refer to the illustration that most closely matches your computer. Replace the battery. Turn the computer right-side up, and then reconnect external power and external devices. Turn on the computer. Chapter 5 Drives...

  • Page 67: External Devices

    External devices Using a USB device Universal Serial Bus (USB) is a hardware interface that can be used to connect an optional external device, such as a USB keyboard, mouse, drive, printer, scanner, or hub. Some USB devices may require additional support software, which is usually included with the device. For more information about device-specific software, refer to the manufacturer's instructions.

  • Page 68: Using Usb Legacy Support

    Using USB legacy support USB legacy support (enabled by default) permits the following actions: ● Using a USB keyboard, mouse, or hub connected to a USB port on the computer during startup or in an MS-DOS-based program or utility ● Starting or restarting from an optional external MultiBay or an optional USB bootable device USB legacy support is enabled at the factory.

  • Page 69: Stopping And Removing An Esata Device

    Connect the eSATA cable for the device to the eSATA port. Once connection has been established, an authentication window opens on the screen asking for the root password. Enter the root password, and then the system auto-mounts the eSATA device and an icon is placed on the desktop.
  • Page 70 To connect an external device to the computer: CAUTION: To reduce the risk of damage to the equipment when connecting a powered device, be sure that the device is turned off and the AC power cord is unplugged. Connect the device to the computer. If you are connecting a powered device, plug the device power cord into a grounded AC outlet.

  • Page 71: External Media Cards

    External media cards Using Media Card Reader cards Optional digital cards provide secure data storage and convenient data sharing. These cards are often used with digital media-equipped cameras and PDAs, as well as with other computers. The Digital Media Slot supports the following digital card formats: ●...

  • Page 72: Removing A Digital Card

    Removing a digital card CAUTION: To prevent loss of data or an unresponsive system, be sure that you are not accessing the digital card before removal. Save your information and close all programs associated with the digital card. NOTE: Refer to the digital card user documentation for complete instructions on safe card removal.

  • Page 73: Removing An Expresscard

    Pull the insert out of the slot (2). To insert an ExpressCard: Hold the card label-side up, with the connectors facing the computer. Insert the card into the ExpressCard slot, and then push in on the card until it is firmly seated. NOTE: An inserted ExpressCard uses power even when idle.
  • Page 74 Chapter 7 External media cards...

  • Page 75: Memory Modules

    Memory modules The computer has one memory module compartment, which is located under the keyboard. The memory capacity of the computer can be upgraded by adding a memory module to the vacant expansion memory module slot or by upgrading the existing memory module in the primary memory module slot. All memory modules installed in the computer must be the same type.
  • Page 76 Remove the screws from the battery area. NOTE: Refer to the illustration that most closely matches your computer. Chapter 8 Memory modules...
  • Page 77 Remove the 2 screw covers (1) and screws (2) from the back edge of the computer. NOTE: Some models do not have any screw covers or screws to remove. Turn the computer display-side up, and then open the computer as far as possible. CAUTION: Do not use excessive force to open the computer beyond the limits of the display hinges.
  • Page 78 Remove the screws from the keyboard. NOTE: Refer to the illustration that most closely matches your computer. Chapter 8 Memory modules...
  • Page 79 Slide the keyboard back toward the display (1), and then rotate it forward (2) to gain access to the keyboard cable connector. NOTE: Refer to the illustration that most closely matches your computer. CAUTION: Do not rip the keyboard cable. –...
  • Page 80 Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot. To protect a memory module after removal, place it in an electrostatic-safe container. Insert a new memory module: CAUTION: To prevent damage to the memory module, hold the memory module by the edges only.
  • Page 81 Gently press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. Adding or replacing memory modules...
  • Page 82 Turn over the keyboard (1) into the keyboard tray, and then slide the keyboard (2) into place. NOTE: Refer to the illustration that most closely matches your computer. Chapter 8 Memory modules...
  • Page 83 Replace the screws on the keyboard. NOTE: Refer to the illustration that most closely matches your computer. Adding or replacing memory modules...
  • Page 84 Place the switch cover on top of the switch cover tray (1), and then slide the switch cover into place (2). Close the computer display. Turn the computer upside down on a flat surface, with the battery bay toward you. Replace the 2 screws (1) and their covers (2) on the back edge of the computer.
  • Page 85 Replace the screws in the battery area. NOTE: Refer to the illustration that most closely matches your computer. Replace the battery. Turn the computer right-side up, and then reconnect external power and external devices. Turn on the computer. Adding or replacing memory modules...

  • Page 86: Security

    Security NOTE: Some of the features described in this chapter may not be supported by your computer or your operating system. Protecting the computer NOTE: Security solutions are designed to act as deterrents. These deterrents may not prevent a product from being mishandled or stolen. Security features provided with your computer can protect the computer, personal information, and data from a variety of risks.

  • Page 87: Setting Passwords In The Operating System

    ● If you forget the setup password set in Computer Setup, you will not be able to access the utility. ● If you have the stringent security feature enabled in Computer Setup and you forget the setup password, the computer is inaccessible and can no longer be used. Call technical support or your authorized service provider for additional information.

  • Page 88: Managing A Setup Password

    Note the following characteristics of the setup password: ● It is not interchangeable with an operating system root password, although both passwords can be identical. ● It is not displayed as it is set, entered, changed, or deleted. ● It must be set and entered with the same keys. For example, a setup password set with keyboard number keys will not be recognized if you enter it thereafter with embedded numeric keypad number keys.

  • Page 89: Setting A Drivelock Password

    To apply DriveLock protection to an internal hard drive, a user password and a master password must be set in Computer Setup. Note the following considerations about using DriveLock protection: ● After DriveLock protection is applied to a hard drive, the hard drive can be accessed only by entering either the user password or the master password.

  • Page 90: Removing Drivelock Protection

    Use the arrow keys to select the location of the internal hard drive, and then press f10. Use the arrow keys to select the field for the password you want to change. Type your current password in the Old password field, and then type the new password in the New password field and in the Verify new password field.

  • Page 91: Setting Stringent Security

    The stringent security feature enhances power-on security by forcing user authentication with your configured setup password or smart card PIN before granting access to the system. Setting stringent security To enable stringent security in Computer Setup, follow these steps: Open Computer Setup by turning on or restarting the computer, and then pressing while the “F10 = ROM Based Setup”...

  • Page 92: Using Firewall Software

    Using firewall software When you use the computer to access e-mail, a network, or the Internet, unauthorized persons may be able to gain access to information about you, the computer, and your personal files. Use the firewall software preinstalled on the computer to protect your privacy: Select Computer >...
  • Page 93 NOTE: The location of the security cable slot varies by computer model. Installing a security cable...

  • Page 94: 10 Computer Setup

    10 Computer Setup Starting Computer Setup Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating system is not working or will not load. NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your computer or your operating system.

  • Page 95: Restoring Factory Settings In Computer Setup

    Your preferences go into effect when the computer restarts. Restoring factory settings in Computer Setup To return all settings in Computer Setup to the values that were set at the factory, follow these steps: Open Computer Setup by turning on or restarting the computer, and then pressing while the "F10 = ROM Based Setup"...

  • Page 96: Diagnostics Menu

    Select To do this Setup Password Enter, change, or delete a setup password. ● Password Options Enable/disable stringent security. ● Enable/disable the password requirement on computer restart. ● DriveLock Passwords Enable/disable DriveLock on any computer hard drive. ● Enter, change, or disable DriveLock on an optional MultiBay hard drive.

  • Page 97: System Configuration Menu

    System Configuration menu NOTE: Some of the menu items listed in this section may not be supported by your computer or your operating system. Select To do this Language Change the Computer Setup language. ● Boot options Set an f9, f10, and delay when starting up.
  • Page 98 Select To do this Built-in device options ● Enable/disable embedded WLAN Device Radio. ● Enable/disable embedded Bluetooth Device Radio. ● Enable/disable Network Interface Controller (NIC) ● Enable/disable LAN/WLAN Switching. ● Enable/disable Wake on LAN. ● Enable/disable the integrated camera (webcam) ●...
  • Page 99 Index Bluetooth connector, power 7, 8 AC adapter label 13 copyright warning 28 connecting 33 boot options 87 cord, power 12 identifying 12 boot order 87 AC adapter light, identifying 7, 8 buttons device security 80 airport security devices 42 power 4 Diagnostic menu 86 antennas...
  • Page 100 decreasing screen labels e-mail application hotkey 16 brightness 15 e-mail client light, identifying 2 decreasing speaker Bluetooth 13 earbuds 20 volume 16 HP Mobile Broadband embedded keypad keys, description 14 Module 13 identifying 5 increasing screen modem approval 13 eSATA cable, connecting 58 brightness 15 regulatory 13 eSATA devices...
  • Page 101 using 26 setup utility USB ports, identifying 7, 8, 9, writing to 22 Diagnostic menu 86 optical drive File menu 85 user password 77 identifying 7 navigating and selecting 84 using the webcam 30 protecting 22 restoring factory settings 85 optical drive light, identifying 7 Security menu 85 vents, identifying 8, 9...

Table of Contents