HP OmniBook 6000 Service Manual page 81

Power Menu
Windows 2000 uses only the settings marked with *. Windows 98 uses only the settings marked with * or **.
All other settings in the Power menu are ignored.
Intel SpeedStep Mode*
Power Management Mode
Smart CPU Mode
Display-off Time-out
Suspend Time-out
Hibernate Time-out**
Hard Disk Time-out
Time-out on AC
Lid Switch Mode
Resume On Serial Ring
Resume On Time of Day
Resume Time
Auto Suspend on Undock*
Auto Turn-On on Dock*
* Windows 98 and 2000 use these settings.
** Windows 98 uses this additional setting.
Boot Menu
+Removable Device
+Hard Disk
CD-ROM/DVD Drive
MBA UNDI
Exit Menu
Save Changes and Exit
Discard Changes and Exit
Get Default Values
Load Previous Values
Save Changes
HP OmniBook 6000
Sets the speed used by a dual-speed processor at boot,
depending on the available power source. A separate Control
Panel power setting controls speed changes after boot.
Disables time-outs, selects a combination of time-outs, or
allows customized time-outs.
Enables automatic CPU power savings when running on
battery power. Absence of keyboard, mouse, and hard disk
activity could cause slower CPU response.
Sets the period of inactivity after which the computer enters
Display-off power mode.
Sets the period of inactivity after which the computer goes
from Display-off to Standby power mode. (Skips Display-off
mode if that time-out is disabled.)
Sets whether the computer goes from Standby to Hibernate
power mode after the indicated period of inactivity. (Skips
Standby mode if the suspend time-out is disabled.)
Sets the period of hard disk inactivity after which the internal
hard disk (and any hard disk drive in the plug-in module bay)
stops spinning.
Sets whether power management time-outs occur while the ac
adapter is connected.
Sets the action that occurs if the computer's lid is closed.
Sets whether the system resumes if it received a ring signal.
Sets whether the system resumes at a defined time of day.
Sets the 24-hour time when the system resumes from if
Resume On Time of Day is enabled.
Sets whether the computer suspends to Standby power mode
after undocking.
Sets whether the computer turns on after docking.
Shows the order of boot devices, with "+" indicating a device
category. Move the entries to change the order. If the
computer has more than one device in a category, you can
select the one scanned. MBA UNDI (Managed Boot Agent)
appears in the list only if a built-in LAN is present—it provides
diskless boot from a network server.
Saves Setup changes, then exits and reboots.
Discards any Setup changes made since last save, then exits
and reboots. Does not affect password, date, or time changes.
Restores default settings, and remains in Setup. Does not
affect password, date, or time changes.
Discards any Setup changes made since last save, and
remains in Setup. Does not affect password, date, or time
changes.
Saves Setup changes, and remains in Setup. Security
settings are saved when changed.
Troubleshooting and Diagnostics
Default
Automatic
Max. Power
Savings
On
2 minutes
4 minutes
4 hours
2 minutes
Disabled
Turn off LCD
Enabled
Disabled
When Lid Closed
Enabled
Default
1. Removable
Device
2. Hard Disk
3. CD-ROM/DVD
drive
4. MBA UNDI
3-29