Figure 2-16. Removing The Cd/Dvd Drive - HP NX9010 Service Manual

Note
This section applies only to HP Pavilion 5300 and 5200, HP nx9010, and Compaq Presario 2500
models.
Required Equipment
•
#1 Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
2. Remove these additional assemblies:
•
Keyboard cover (page 2-12).
•
Keyboard (page 2-16).
3. Remove the two M2.5×6.0 mm screws that secure the CD/DVD drive to the top case and
motherboard.
4. Place your index finger in the top case opening and push out on the CD/DVD drive to release it
from the motherboard.
5. Remove the CD/DVD drive.
HP Pavilion 5300 and 5200, HP nx9010, and Compaq Presario 2500 Models
2-22 Removal and Replacement

Figure 2-16. Removing the CD/DVD Drive

Service Manual