HP NX9010 Service Manual page 135

Component
Guide, HDD
Heat sink (with fan)
Keyboard
Panel, wireless
PCA, I/R
PCA, left and right
antennas (wireless
models only)
PCA, motherboard
PCA, switchboard
Socket, PCMCIA
Speaker assembly
2-64 Removal and Replacement
Removal Procedure
Keyboard cover
(page 2-12).
Speaker (page 2-15).
Keyboard (page 2-16).
Switchboard PCA
(page 2-18).
CD/DVD (page 2-20).
Display (page 2-23).
Top case (page 2-26).
See page 2-40.
See page 2-16.
Keyboard cover
(page 2-12).
Speaker (page 2-15).
Keyboard (page 2-16).
Switchboard PCA
(page 2-18).
CD/DVD (page 2-20).
Display (page 2-23).
Top case (page 2-26).
See page 2-36.
Keyboard cover
(page 2-12).
Speaker (page 2-15).
Keyboard (page 2-16).
Switchboard PCA
(page 2-18).
CD/DVD (page 2-20).
Display (page 2-23).
Top case (page 2-26).
Floppy (page 2-32).
Heat sink (page 2-40).
Motherboard (page 2-50)
Bottom case (page 2-59).
See page 2-50.
See page 2-16.
Keyboard cover
(page 2-12).
Keyboard (page 2-16).
CD/DVD (page 2-20).
Display (page 2-23).
Top case (page 2-26).
Floppy (page 2-32).
Heat sink (page 2-40).
Motherboard (page 2-50).
See page 2-15.
Additional Steps
When replacing the HDD guide, make sure you only
replace the two right screws. Do not replace the two left
screws.
Press the tabs on both sides of the panel and then lift it
from the bottom case.
Disconnect the front antenna PCA cables from the
mini-PCI card (page 2-7).
Be careful not to bend the metal tabs on the bottom
case when removing or replacing either of the two
antenna PCAs.
1. Remove the two screws attaching the socket to the
motherboard.
2. Unplug the PCMCIA socket from the motherboard.
Service Manual