Editing/Deleting Speed Dial Destinations - Konica Minolta magicolor 4690MF User Manual

7
Use the keypad to type in the search keyword (maximum of 10 charac-
ters), and then press the Select key.
The search begins, and the search results appear after a while. If no data
matches the search keyword,
onds.
For details on entering/editing text, refer to "Entering Text" on page
265.
Text starting with the first character of the maximum 10 characters
is searched for. Text will not be found if the search keyword is in
the middle of a word.
8
Press the + or , key to select the desired data, and then press the Select
key.
To check the found information, press the
An e-mail address exceeding 64 characters cannot be specified. If
such an e-mail address is specified,
appears for about two seconds, and then the screen for specifying
the destination address appears.
To narrow down the search results, press the Back key, and then
perform step 7 again.
9
If desired, edit the registration name, and then press the Select key.
10
If desired, edit the e-mail address, and then press the Select key.
The settings are registered, and the
again.

Editing/Deleting Speed Dial Destinations

Information registered as a speed dial destination can be edited or deleted.
Machine key operations cannot be used to edit/delete an FTP address
or SMB address registered as a speed dial destination. These
addresses can be edited/deleted with Local Setup Utility (LSU) or
PageScope Web Connection. For details, refer to the Reference
Guide on the Documentation CD/DVD.
1
In the main screen (Scan mode), press the + or , key to select
, and then press the Select key.
ITY
2
Press the + or , key to select
Select key.
3
Press the + or , key to select
key.
Scanning With the Machine
appears for about two sec-
NOT FOUND
ADDRESS IS TOO LONG
DIAL REGISTER
DIAL REGISTER
, and then press the Select
SPEED DIAL
key.
)
menu appears
UTIL-
, and then press the
145