Editing/Deleting Speed Dial Destinations - Konica Minolta BIZHUB C20 User Manual

Editing/Deleting Speed Dial Destinations

Information registered as a speed dial destination can be edited or deleted.
Machine key operations cannot be used to edit/delete an FTP address
or SMB address registered as a speed dial destination. These
addresses can be edited/deleted with Local Setup Utility (LSU) or
PageScope Web Connection. For details, refer to the Reference
Guide on the Documentation CD/DVD.
1
In the main screen (Scan mode), press the + or , key to select
, and then press the Select key.
ITY
2
Press the + or , key to select
Select key.
3
Press the + or , key to select
key.
4
Use the keypad to type in the number (between 1 and 220) for the speed
dial destination to be edited/deleted, and then press the Select key.
The information currently registered for the speed dial destination
appears for two seconds.
5
Press the + or , key to select
delete the destination, and then press the Select key.
If
DELETE
ISTER
6
Use the keypad to edit the registration name, and then press the Select
key.
7
Use the keypad to edit the e-mail address, and then press the Select key.
The edited settings are saved, and the
again.
190
was selected, the settings are deleted, and the
menu appears again.
For details on entering/editing text, refer to "Entering Text" on page
323.
If the edited speed dial destination is registered in the favorite list
or with a group dial destination, a confirmation message asking
whether or not to keep the destination registered as it is appears
after the operation in step 7 is performed. To keep the destination
registered as it is, select
.
No
DIAL REGISTER
, and then press the Select
SPEED DIAL
to edit information or
EDIT
DIAL REGISTER
. To cancel the registration, select
Yes
Scanning With the Machine
UTIL-
, and then press the
DELETE
DIAL REG-
menu appears
to