Konica Minolta magicolor 4690MF User Manual page 44

Manufacturer's default settings appear in bold.
AUTO PANEL RESET
PREHEAT MODE
ENERGY SAVE MODE
LCD CONTRAST
32
TONER NEAR EMPTY
AUTO CONTINUE
CALIBRATION
Setting
OFF
3min
Specify the length of time until all settings that
have not been programmed, such as the num-
ber of copies, are cleared and return to their
default settings when no operation is performed.
To set the machine to perform the auto panel
reset operation, select from 30sec, 1min, 2min,
3min, 4min or 5min for the length of time until
the auto panel reset operation is performed.
Setting
to
1 120 min
Enters Preheat mode (first stage of the energy
save mode) in order to conserve energy when
no operation is performed. Specify the length of
time in minutes until the machine enters Pre-
heat mode.
Setting
to
6 120 min
Enters Energy Save mode in order to conserve
energy when no operation is performed. Specify
the length of time in minutes until the machine
enters Energy Save mode.
Setting (LIGHT)
Specify the brightness of the message window.
Configuration Menu Overview
/ / /
30sec 1min
/ /
4min 5min
(Default:
(Default:
(DARK)
/
2min
)
15 min
)
30 min