Memory Module - HP ENVY 14 Maintenance And Service Manual

Memory module

Description
4096-MB memory module (PC3, 12800, 1600-MHz)
8196-MB memory module (PC3, 10600, 1333-MHz)
4096-MB memory module (PC3, 10600, 1333-MHz)
2048-MB memory module (PC3, 10600, 1333-MHz)
Before removing a memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery cover and battery (see
5. Remove the memory module/wireless module compartment cover (see
on page
Remove the memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The memory module tilts up.)
2. Remove the memory module (2) by pulling it away from the slot at an angle.
Reverse this procedure to install a memory module.
46 Chapter 4 Removal and replacement procedures
41).
Battery on page 36).
Spare part number
641369-001
634091-001
621569-001
581096-001
WLAN module