Switching The Memory Setting - A&D UA-767NFC Instruction Manual

Switching the Memory Setting

While the device displays the clock, hold the communication symbol of the
NFC-enabled communication device close to the communication area (
device until "
Initiate
communication
Clock display
Initiate
communication
Clock display
Note: When switching the memory setting from 100 to 0,
the memory data, if any, will be deleted.
" appears. The memory setting is switched.
Transmission starts
Transmission starts
Data
transmission
Transmission ends
(The memory setting has
been switched to 100.)
Data
transmission
Transmission ends
(The memory setting has
been switched to 0.)
English 16
) of the
100 blinks.
0 blinks.