About Memory - A&D Life Source UA-1030T Instruction Manual

Note: This device stores the last 90 measurements in memory. The device announces the memory
data values as they are displayed.
1. Press the or
measurements and the number of data are
displayed. (If no data, "0" is displayed.
Press the
device off.)
2. Each time the
to display the data in the reverse order) is
pressed, the memory data is displayed as
follows.
Average of all AM (morning) measurements
taken between 4:00 and 9:59. (In the
example, 10 measurements. If no data, "--" is
displayed.)
Average of all PM (evening) measurements
taken between 18:00 and 1:59. (In the
example, 9 measurements. If no data, "--" is
displayed.)
Most recent data (See No. 35). Three
seconds after the data number display, the
measurement data is displayed.
Last data (No.1). Three seconds after the
data number display, the measurement data
is displayed.
3. After the last data is displayed, press the
button to return the average display of all measurements.
4. Press the
START
non-operation, the device will turn off automatically.
In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991
button. The average of all
, or button to turn the
START
button (or the
button to turn the device off. After one minute of
Press
button

ABOUT MEMORY

or
Average systolic
Average diastolic
Average pulse
Average of
all the data
Average systolic
Average diastolic
Average pulse
Average
of AM data
Average systolic
Average diastolic
Average pulse
Average
of PM data
Most recent data
Last data (Oldest)
Systolic
Diastolic
Pulse
Systolic
Diastolic
Pulse
E-20