Recalling The Memory Data - A&D UB-533 Instruction Manual

Note: This device stores the last 60 measurements in memory.
1. Press the button when turning the device off.
The average of all measurements and the number of data are displayed.
If no data, "0" is displayed. Press the
device off.
2. Use the following buttons to display data (of number and measurement data).
Select a user from user
The device displays the average of all measurements and the
number of data are displayed.
Pressing the button each time , the device displays as follows:
Average data of all AM (morning) measurements taken between
4:00 and 9:59. In the example, If no data,
Average data of all PM (evening) measurements taken between
18:00 and 1:59.
Data (of number and measurement data).
The device displays in order from most recent data. The date
and time are displayed alternately while displaying the
measurement data.
In the example: No.30 & data
3. If you press the button after oldest data is displayed, the device
proceeds to step 1, the average of all measurements and the number of
data are displayed.
4. Press the button to turn the device off.
START
After one minute of non-operation, the device will turn off automatically.

Recalling the Memory Data

or button to turn the
START
and user using the
is displayed.
No.29 & data
English 14
Average of all the
button.
SET Number of all data
Average for AM data
Number of AM data
Average for PM data
Number of PM data
Most recent data
No.01 & data.
Last data (Oldest)
Turn off
button
Memory mode
User selection button
Example: user
data
button
AM indicator
button
PM indicator
button
Ex.: No.30
Date
button
Time
button
3 seconds
Date
button
Time
3 seconds
Turn off