Recalling The Memory Data; Deleting Data Stored In Memory - A&D ESSENTIAL UB-525 Instruction Manual

Recalling the Memory Data

Note: This device stores the last 60 measurements in memory.
1. Press the button when turning the device off. The average of all
measurements and the number of data are displayed. If no data, "0" is
displayed. Press the
2. Use the following buttons to display data (of number and measurement data).
• The device displays the average of all measurements and the number
of data are displayed.
• Pressing the button each time , the device displays as follows:
• Average data of all measurements taken between.
• Data (of number and measurement data). The device displays in order
from most recent data.
In the example: No.30 & data
3. If you press the
to step 1, the average of all measurements and the number ofdata are displayed.
4. Press the START button to turn the device off. After one minute of non-operation, the device will turn
off automatically.

Deleting Data Stored in Memory

When the device is turned off, press and hold the
mark, deletes data stored in memory when the
automatically.
E-14
or START button to turn the device off.
No.29 & data
button after oldest data is displayed, the device proceeds
...
No.01 & data.
button. The device displays the
mark is blinking and turns off
Turn off
Memory mode
Average of all the data
Number of all data
Ex.: No.30
Most recent data
Last data (Oldest)
button
button
button
button
Turn off