Install an expansion board into the PCI riser cage.
7.
Install the optional secondary PCI riser cage.
8.
If not already installed, install the secondary processor
9.
Install the access panel (on page 20).
10.
Install the server into the rack
11.
Connect each power cord to the server.
12.
Connect each power cord to the power source.
13.
Power up the server (on page 18).
14.
2U rack bezel option
The 2U rack bezel helps prevent any unauthorized physical access to the server in the rack configuration. To
access the hard drive cage, you must unlock and open the 2U rack bezel.
To unlock the 2U rack bezel, use the key provided with the kit.
("Installing the server into the
("Processor
option" on page 34).
rack" on page 30).
Hardware options installation 60