Table of Contents
Advertisement
Label color
Output
1,200W
Green
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
To install the component:
Access the product rear panel (on page 21).
1.
Remove the blank.
2.
WARNING:
power supply blank to cool before touching it.
Insert the power supply into the power supply bay until it clicks into place.
3.
Connect the power cord to the power supply.
4.
Route the power cord. Use best practices when routing power cords and other cables. A cable
5.
management arm is available to help with routing. To obtain a cable management arm, contact an HP
authorized reseller.
Connect the power cord to the AC power source.
6.
Be sure that the power supply LED is green
7.
To reduce the risk of personal injury from hot surfaces, allow the power supply or
("Rear panel LEDs and
buttons" on page 10).
Hardware options installation 53
Advertisement
Table of Contents
