Table of Contents
Advertisement
Battery replacement
If the server no longer automatically displays the correct date and time, you may need to replace the battery
that provides power to the real-time clock. Under normal use, battery life is 5 to 10 years.
WARNING:
pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not
properly handled. To reduce the risk of personal injury:
Do not attempt to recharge the battery.
•
•
Do not expose the battery to temperatures higher than 60°C (140°F).
Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
•
Replace only with the spare designated for this product.
•
To remove the component:
Power down the server (on page 18).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Extend the server from the rack (on page 18).
3.
Remove the access panel (on page 20).
4.
Remove the PCI riser cage
5.
CAUTION:
remove all AC power cords before removing or installing the expansion boards.
Remove the battery.
6.
The computer contains an internal lithium manganese dioxide, a vanadium
("Remove the primary PCIe riser
To prevent damage to the server or expansion boards, power down the server and
cage" on page 21).
Battery replacement 82
Advertisement
Table of Contents
